Samsung S8 Plus Spd 7731 Nand Flash File

 SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime

Phone found! [ 66 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x1C , NAND : b128k
[FW_READER] : Step #3 Passed!
Model Name  : project_public
Model Brand : welcome
Model Device: scx15_sp7715ga
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : RJ093_P113_J7_Prime_ZHX-V1.0_20180312
Model Ext   : J7 Prime

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b128k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.34.2_Release.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : logo10.bin
[Read Ok] : boot.img
[Read Ok] : system_b128k.img
[Read Ok] : cache_b128k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b128k.img

AndroidInfo created
Firmware Size : 307 MiB
Saved to :C:\Inferno Firmware\Desktop\samsung s8 plus spd flash file\SCX15_SP7715GA_[NAND_b128k]_scx15_sp7715ga_4.4.2_RJ093_P113_J7_Prime_ZHX-V1.0_20180312_J7_Prime\
Done!